The Greenstar Utility 18/25 Boiler is an economical appliance finished in a
durable white casing. Within the cabinet are the temperature controller and
re-set buttons however, there is no position to install the optional timer,
only external controls can be used.
If you are upgrading a system or replacing an existing system in a small or
medium sized property the Worcester Greenstar Utility 18/25 Condensing boiler
is ideal for households with a preference for stored hot water.
The Greenstar Utility 18/25 Condensing Gas Boiler can be installed most beneficially
where space and water storage are a problem. Designed for siting within a kitchen
or utility room.
Rated as SEDBUK A - this boiler is designed to serve central heating and
hot water requirements ranging from 18 to 25kW
Designed to fit neatly neatly between standard kitchen units and so ideally
suited to both Kitchen or Utility Room installation.
 |
| Boiler
Output |
18
to 25kW
(61,400 to 85,300 Btu/h) |
| Flue
Gas Temp. |
Below
100°C |
| Oil
Burner |
Bentone
Sterling 50
Oil burner Suitable for 28 sec
Kerosene Oil only |
| Lift
Weight |
119kg |
| Height (A) |
855mm |
| Width (B) |
370mm |
| Depth (C) |
600mm |
Although
clearance above the Greenstar Utility Boiler Range is stated to
be 300mm, a removable worktop may be placed directly above the boiler,
allowing for 5mm clearance. |
|
This boiler will require a Flue Kit and a Programmer. We have pre-checked the
Horizontal Flue Kit and 7 Day External Programmer Below for your convenience.
The following link contains further information about this product