EHC SLIMLINE Electric Boiler 14.4kW Single Phase

Code

Description

Inc. VAT

Excl. VAT

	EHCFUSSL15kW - EHC SLIMLINE Electric System Boiler 14.4kW Single Phase		£984.58		£820.48

Silicone

Smoke Alarms & Carbon Monoxide Alarms

Fusion Electronic Single Channel Programmer

£75.90 (£63.25 exc. VAT)

Fusion Twin Channel Heat Pack

£173.11 (£144.26 exc. VAT)

Fusion Shower Flow Sensor

£137.88 (£114.90 exc. VAT)

The Fusion Boiler is the perfect solution for properties with no access to mains gas supply and homes which have gas boiler restrictions e.g. listed buildings and bed-sit sleeping areas. Not only is the Fusion electric boiler the ideal choice for wet central heating but it's also suited to Underfloor heating.

The Fusion Electric Boiler is one of the most complete electric boilers in the market today. Unlike most Electric boilers, the Fusion was designed to eliminate unnecessary external plumbing and pipe work.

A magnetic filter is also supplied with the boiler which must be installed on the return pipework. By adding an expansion vessel to the EHC Slimline results in a full system boiler.

Please note, this product is NOT a Combi Boiler. and for hot water needs to work in conjunction with a hot water cylinder.

Fusion electric boiler benefits

No flue required
No fumes and no risk of explosion
100% efficient
Economic running costs
Virtually silent in operation
Can provide central heating only or central heating & hot water
Can be used for under floor heating
No annual safety certificate required
24 hour controllability
No maintenance required
Multiple fail-safes fitted in unit
LED indicators show status of operation
Preferential electricity tariffs available

Features not found within the Amptec / Aztec boilers

Control Panel from which the engineer can set the boiler temperature, monitor flow & return temperatures, flow rate and kW usage
Over Heat Stat (thermal cut-out unique to the EHC range of boilers)
Automatic Air Vent
Circulation Pump – Grundfos 15/50
Flow & Return Sensors
Flow Switch
Pressure Gauge
Pressure Relieve Valve

Boiler Further Information

Key Features

Installation Options

Installation Manual

Boiler Dimensional Diagram

Boiler Technical Table

Pipe entry from boilers	Bottom entry
Flow & Return Pipes	mm	22
Min Water Pressure	Bar	1.0
Max Water Pressure	Bar	3.0
Dry weight	Kgs	25
Electricity Supply	230/240V 1ph 50 Hz
Load/Current	Amp	62.6
Heating output	Btu	49.147
Potentiometer Max Temp Settings (Factory Set)	°C	85
Min Temp Setting	°C	40
Overheat Protection	°C	100
Pump included	Yes
Recommended Pump settings	Set to max
Protection	Amp	80
Boiler Dimensions	mm	660(H) x 380(W) x 175(D)

A survey by a qualified heating engineer is recommended prior to your purchase to avoid under-sizing of your Fusion Electric Boiler.

Please note - before purchasing any electric appliance we advise you to contact a qualified electrician, who will ensure you have adequate surplus electric supply to run this appliance. Once this product has been opened, a charge may apply if you return this item. It is a legal requirement that all electrical appliances are sent away for testing and repackaging before they can be resold.