This Boiler Unit houses a 9kW Electric Boiler with a 180 Litre Cylinder
The Fusion E10 Electric Combination unit offers the
comfort and convenience of wet central heating and
domestic hot water for all domestic properties with
no access to mains gas.
The Fusion E10 Combination unit is a fully packaged
unit which is housed in an elegant enclosure and
comes complete with the Fusion Slimline Electric
Boiler, Indirect stainless steel Hot Water cylinder and
is pre-plumbed using the ‘S’ Plan configuration. Also
incorporated are the Expansion vessels required for
both the Heating and Domestic Hot Water.The unit
is also supplied complete with Tundishes and
Control Valves.
The unit is pre-wired with a fully programmable
Controller to provide full control of both the central
heating and domestic hot water.
The ‘S’ Plan configuration enables you to select
Heating only, Hot Water only or both at the same
time. As the boiler is also heating the Indirect
cylinder, the re-heat times for the Hot water is
superior to that of a Direct cylinder comprising of an
Immersion heater only.
The Fusion E10 Combination unit is compact in size
and has been designed to fit into a standard domestic
airing cupboard making it ideal for a range of
properties as there are no flue requirements.
Fusion electric combi boiler benefits
- Controllable, efficient wet central heating
- Programmable room thermostat to suit the Off-peak times offered by the Economy 10 tariff
- Uses standard radiators and thermostatic radiator valves
- Designed as a sealed system
- Domestic hot water from Un-vented Indirect Stainless Steel cylinder offering mains pressure hot water
- Cylinder manufactured from Duplex Stainless Steel
- No flue and no fuel tanks required
- Silent in operation
- Front panel indication to show boiler status
- Soft start approach to avoid power surges
- Integral Magnetic filter for boiler protection
- Adjustable controls to determine boiler temperature outputs
- Minimal service and maintenance costs
- No requirement for annual gas safety certificate
- On-site parts and labour guarantee 10 years on the cylinder
- 2 years on boiler and other controls
Boiler Further Information
Boiler Dimensional Diagram
Boiler & Cylinder Technical Table
| |
Units |
Boiler |
Cylinder |
| Heating Output |
Btu |
30717 |
|
| Electricity Supply |
230/240V 1ph 50 Hz |
|
| Load/Current |
Amp |
39.1 |
|
| Protection Required |
Amp |
45.0 |
|
| CH Max Temp Setting Factory Set |
°C |
85 |
55/60 |
| CH Min Temp Setting |
°C |
40 |
25 |
| CH Overheat Protection |
°C |
100 |
|
| Pump Included |
Yes |
|
| Recommended Pump Settings |
Set to Max |
|
| CH Flow & Return Pipes |
mm |
22 |
|
| Domestic & Primary Connections |
mm |
|
22 |
| Min Water Pressure |
Bar |
1.0 |
3.0 |
| Max Water Pressure |
Bar |
3.0 |
7.0 |
| Expansion Vessels |
Litre |
8.0 |
12.0 |
| Back Up Immerser |
kW |
|
3.0 |
| Dry Weight |
Kgs |
|
104 |
| Unit Dimensions |
mm |
1620(h) x 574(w) x 750(d) |
Please note - before purchasing any electric appliance we advise you to contact a qualified electrician, who will ensure you have adequate surplus electric supply to run this appliance. Once this product has been opened, a charge may apply if you return this item. It is a legal requirement that all electrical appliances are sent away for testing and repackaging before they can be resold.
The following link contains further information about this product
